安装铜门时的注意事项

Precautions when installing copper doors

　　1尺寸测量

1 Dimensional measurement

　　确保铜门的尺寸准确无误，以便能够顺利安装在预定的位置上。测量时应考虑门的宽度、高度以及厚度，并确保误差不超过20毫米。

Ensure that the size of the copper door is accurate and accurate, so that it can be installed smoothly in the designated position. When measuring, the width, height, and thickness of the door should be considered, and the error should not exceed 20 millimeters.

　　2安装准备

2 Installation preparation

　　在安装铜门之前，应确保门两侧的墙壁厚度相同，以保证门能够均匀地安装在墙上。如果两侧墙壁厚度不一致，可能需要使用工具调整墙壁厚度，以适应铜门的安装。

Before installing the copper door, ensure that the wall thickness on both sides of the door is the same to ensure that the door can be installed evenly on the wall. If the thickness of the walls on both sides is not consistent, it may be necessary to use tools to adjust the wall thickness to accommodate the installation of the copper door.

　　3保护措施

3 Protection measures

　　在安装的过程中，应采取适当的保护措施，例如:使用包装袋覆盖铜门表面，以防止施工过程中的损伤。同时，应避免坚硬物体碰撞或摩擦铜门，以免造成表面层损坏或加速氧化反应。

During the installation process, appropriate protective measures should be taken, such as using environmentally friendly packaging bags to cover the surface of copper doors to prevent damage during construction. At the same time, hard objects should be avoided from colliding or rubbing against copper doors to prevent surface layer damage or accelerated oxidation reactions.

　　4避免污染

4. Avoid pollution

　　在装修期间，应防止水泥、油漆等含有酸碱成分的物质接触铜门表面，因为这些物质可能会腐蚀铜门，导致斑点或生锈。如果不慎接触，应立即用清水棉布擦拭去除。

During the decoration period, it is necessary to prevent substances containing acid and alkali components such as cement and paint from coming into contact with the surface of copper doors, as these substances may corrode the copper doors, causing spots or rust. If accidentally touched, it should be immediately wiped off with a clean cotton cloth.

　　5保养维护

5 Maintenance and upkeep

　　铜门安装后，应定期进行保养，以保持其美观和延长使用寿命。使用柔软的布料擦拭表面，避免使用硬布或粗糙的材料，以免刮伤铜门。对于污渍，可以使用中性清洗剂、牙膏或家具专用清洗剂，但要尽快擦拭干净，避免长时间残留。

After the installation of copper doors, regular maintenance should be carried out to maintain their appearance and extend their service life. Use a soft cloth to wipe the surface and avoid using hard or rough materials to avoid scratching the copper door. For stains, neutral cleaning agents, toothpaste, or furniture specific cleaning agents can be used, but they should be wiped clean as soon as possible to avoid long-term residue.

　　6避免过早拆除保护膜

6. Avoid premature removal of protective film

　　如果在装修期间铜门已经安装好，不要急于拆除表面的保护膜。因为在粉刷过程中可能会有水泥和油漆等化学物质掉落在铜门上，这些物质容易引起斑点或生锈。保护膜应在7天内撕除，以免长时间粘附损坏铜门表面。

If the copper door has already been installed during the decoration period, do not rush to remove the protective film on the surface. Because during the painting process, chemicals such as cement and paint may fall onto the copper door, which can easily cause spots or rust. The protective film should be removed within 7 days to avoid prolonged adhesion and damage to the surface of the copper door.

以上就是有关：济南铜门的介绍，想了解更多的内容请点击：//www.amishhacks.com我们将会全心全意为您提供满分服务，欢迎您的来电！

The above is an introduction to Jinan Copper Gate. To learn more, please click: //www.amishhacks.com We will wholeheartedly provide you with full score service. Welcome to call us!